An important element for a boat, the main tank or feeder is equipped with a boat fuel gauge. The aim is to help you sail with peace of mind and avoid running out of fuel in the middle of a lake or on the open sea. The fact is that this type of equipment allows you to keep a close eye on the level of fuel you have left. At least as long as the gauge is not blocked.
How do you know when the gauge is blocked?
Above all, you should be aware that if you have any doubts about your boat fuel gauge if you have any doubts about the quality of your equipment, it is best to call in a specialist to find out for yourself, especially if you have no DIY skills.
However, you can also find out if the gauge is stuck by focusing on the display needle. And since we’re talking about a stuck gauge, you’ll soon realise that the problem will manifest itself through the needle, which will then stop varying.
A warning sign of a malfunction of the measuring unit inside the boat tank, according to the experts who say that in this case. This kind of anomaly can be partial or total due to rust caused by age or an assembly error.
How do I unjam a blocked boat fuel gauge?
It is highly recommended to call an expert if you are not a handyman. If not, you can always try to unjam your boat fuel gauge. At least, if the fault is still repairable or if it is simply a question of an assembly error.
To begin with, you should know that this is a piece of equipment inserted directly into the tank to act as a sensor to measure the fuel level. This is the float or sensing unit directly linked to the gauge on your dashboard.
This is the part you need to consult if you want to try and fix the problem, noting that you won’t have to worry too much about getting to it as you can simply lift the plastic cover and unscrew the cap or remove the eclipse that blocks it.
Then all you have to do is unplug the plug and lift the gauge. With a bit of luck, you will then only have to shake it a little by tapping it lightly to unblock the float, which is usually stuck by rust. And while you’re at it, take the opportunity to clean it and the inside of the tank. Note that maintaining your boat’s engine parts can help you avoid potential breakdowns. Afterwards, just put everything back in place.
If the problem is not solved in this way, the best thing to do is to think about a replacement part, which you can easily find at authorised dealers. You should also opt for quality parts so that you can enjoy their reliability over time.